V Belts

(A) Top Compression Section - The rubber used in this section is compounded to withstand sudden shock loads and to keep the belt flexing readily When passing over the pulleys.

(B) Insulation Section - The insulation section holds the tension binding section for extra strong abhesion between cords and the top and bottom compression section.

(C) Bottom Compression Selection - This section holds the normal cross section of the belts and is compounded to resist compression fatigue and heat for longer service life.

(D) Tension Member - The load carrying cords are tough polyester/ aramide cords that have been specially treated to temper the cords to their point of high strength, Low elongation and greater resistance to bending fatigue.

(E) Cover - The bias-cut Cover fabric is impregnated with special rubber to protect the inner part of the belts and provide strong abrasion resistance on the pulley groove.

Technical Characteristics- Sectional Dimensions & Sizes (All Sizes in MM)

Process Control in Manufacturing - Confirms the product as Antistatic, Oil & Heat Resistant, quality & length as accurate.

Neelkanth Q-Set V-Belts - Neelkanth Q-Set V-Belts envisage most modern Techno-effect geometrically, accurate length length without and grading, facilitating easy stoking, mounting and smooth longest drive life.