|
|
|
|
ROUGH
TOP BELTS |
|
|
|
Rough
Top belt is designed for
transporting light weight goods,
either being inclined or being horizontal, also suitable
for transporting fragile or deformed materials and
packed goods, such as glass,Paper,bags,boxes or cartoons
at angle from 15 to 35 degree. |
| |
|
|
|
The
bareback Rough Top belt makes less friction coefficient ,
suitable for running over table and flat panel.
|
| |
|
|
The
design of mesh-like pattern on the top surface cover can
generate the relief
effect , adsorbing any vibrations and impacts exerted
on the material conveyed and simultaneously preventing the
material from slip.
|
|
|
|
|
|
|
|
Construction
and Properties
|
|
|
|
2or3-Ply
construction with cut edges and a carcass of synthetic EP
fabric. The surface texture resists the tendency for the
material to roll back down the conveyor. The black top cover
is recommended for utility type incline service while the tan
cover is suggested for transporting packaged food products
where an odorless , non-toxic , non- marking belt is a
necessity. Top cover is a full 1/8* thick SBR and the back is
protected by either a durable friction surface bottom or a
synthetic bare-back for slider bed applicatons.
|
|
|
|
Our
R.T. Belt Standard Specification
|
|
|
|
|
TOP